The Best Advice on I’ve found

Factors to Consider When Choosing Between Water Jet and Laser Cutters

You have presumably needed to cut some materials, and you are pondering, water jet or laser cutting services, which one do you go for? It is important to note that both water jet and laser cutters have their advantages and drawbacks making it challenging for an individual to make a decision. For example, water cutters can cut a more extensive scope of metal, however they also contain a risk danger when compared to laser cutters. Therefore the main question that an individual should ask when they want to cut a piece of metal is what kind of cutting service will give the best result and lower degree of health risk? This report discusses the various important considerations an individual should make when selecting the right cutting service.

The first tip you need to examine when deciding between water jet or laser cutters is the type and thickness of the material you want to cut. It is important to note that both water jet and laser cutters can be used on a wide range of materials including plastic, wood, and metal. However an individual should understand that for thicker materials it is advisable that you use water jet as opposed to laser cutters. For example, water jet cutters can be used to cut materials that have a diameter of two inches while a laser can only be used on materials that have a one-inch thickness or less.

The second consideration you need to make when choosing between water jet and laser cutters technologies is the level of accuracy needed. When it comes to the level of precision, you need to understand that laser cutters are more accurate than water jets. It is important to note that laser cutter will give you more accuracy because it has a smaller minimum slit size compared to water jet cutter. Thus for an individual who wants a high degree of accuracy, a laser cutter is the best option.

The third tip you need to carefully evaluate when choosing between water jet and laser cutters is the damage on the material. Before you choose a cutting service to use for your project, you need to realize that both water jet and laser cutting methods have a probability of damaging the material you want to cut. Water jet cutters use pressure, which may destroy the area being cut. The force you apply can cause strain in a few cases. However when you are using laser cutters, then you need to be worried about burn marks appearing on the cut material. This is typically the situation in compressed wood or MDF materials. However the burned areas can easily be cleaned after you are done with cutting in many cases.

In conclusion, all the factors highlighted in this article are essential when choosing between water jet and laser cutters.

Refer to: description